Oki B 6500 - Manual (Page 61)

B6500 Network Guide> 61
A
PPENDIX
A: S
ETTING
IP A
DDRESS
1. Press the
2. Press the or button until [Network Menu] is
displayed, then press the button.
3. Check that [TCP/IP] is displayed, then press the button.
4. Press the or button until TCP/IP is set for
[Enable], then press the button.5.Press the or button until [IP Address Set] is
displayed, then press the button.6.Press the or button until [Manual] is displayed,
then press the button.
5. Press the or button until [IP Address Set] is
displayed, then press the button.
6. Press the or button until [Manual] is displayed,
then press the
7. Press the or button until [IP Address] is
displayed, then press the button.
8. The first set of numbers of the IP address will blink. Press the
or button to scroll to the desired number.
9. Press the button to save the current set of numbers and
move to the next set.
10. Repeat steps 8 and 9 until all numbers have been set, then
press the button.11.Press the or button until [Subnet Mask] is
displayed, then press the button.12.The first set of numbers of the Subnet Mask will blink. Press
the or button to scroll to the desired number.13.Press the button to save the current set of numbers and
move to the next set.14.Repeat steps 12 and 13 until all numbers have been set, then
press the button.
11. Press the or button until [Subnet Mask] is
displayed, then press the button.
12. The first set of numbers of the Subnet Mask will blink. Press
the or button to scroll to the desired number.
13. Press the button to save the current set of numbers and
move to the next set.
14. Repeat steps 12 and 13 until all numbers have been set, then
press the
15. Repeat steps 11, 12, 13, & 14 to set the Gateway Address as
necessary.
16. Press the button. To exit the menus.
17. Reboot the printer.