Setting the camera mount on the digital camera, Loading in the case, Which digital cameras can be loaded – Olympus PT 023 User Manual
Page 22: Check the operation of the camera, Open the case, Lifting the mode dial knob, E-21
E-21
Lifting the mode dial knob
Pull up the mode dial of the case until it
stops, so that it does not interfere with the
mode dial of the digital camera.
Open the Case.
Insert the buckle opener of the accessory into the buckle opening
lever as shown in the figure (in direction ) Pull the buckle opener
slowly (in direction ). When not using the buckle opener, hold the
buckle opening lever with your thumb and index finger from the side
and pull it up slowly.
Loading in the Case
Which digital cameras can be loaded?
This product (PT-023) is exclusively used for the CAMEDIA C-8080 Wide Zoom.
Check the operation of the camera.
Confirm the operation according to the instruction manual for the digital camera.
Setting the camera mount on the digital camera
Attach the provided camera mount to the tripod
socket of the camera.
:
• Attach the camera mount in the proper direction as
shown in the above figure.
CAUTION