Olympus 730 - Manual (Page 24)

24
EN
Men
u
o
perat
io
ns
Take pictures for labels, and create label images. After shooting, press .
After shooting pictures, select the ones you want to erase, put the R mark to them, and press S.
Select [YES] and press .
• Pictures to be saved are monochrome images. Colors can be changed during the label creation.
g“LABEL Add a label to your picture”(P. 27)
• The warning mark g is displayed when pictures cannot be taken due to reasons such as the internal
memory capacity is insufficient.
Combines target of shoot within a related frame, with the result being saved.
• [IMAGE QUALITY] will be limited to [1600 × 1200].
• Use 43 to select a frame, then press .
• Shoot a picture into the frame.
• Press
 to save the picture.
AF MODE....................................................................... Changing the focusing area
iESP The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
SPOT Focus selection is based on the subject within the AF target mark.
R ....................................................................... Recording sound with still pictures
OFF /ON
LABEL SHOT ......................................................... Taking pictures to use in labels
FRAME ......................................................................... Frame-conformed Shooting
L A B E L S H O T [ I N ]
MENU BACK
Pictures to be created as labels are displayed in red.
12: Adjusts the area displayed in red.
• You can take pictures continuously up to 100 pictures.
• You can adjust the area displayed in red each time you
shoot.
OK S GO
43: Select the pictures.
Erase the pictures with the R mark.
Put the R mark.
Selected picture
OK SET MENU BACK
F R A M E [ I N ]
When activated [ON], the camera will record about 4 seconds of audio
after the picture is taken.
When recording, aim the camera microphone at the source of the
sound you want to record.