Oricom S6000 - Manual (Page 11)

Using Pre-Dialling
You can enter a telephone number and verify it on the display
before you place the call.
• Use the keypad to enter the phone number. The display shows
the digits as you enter them.
• Press , the number entered will be dialled out.
Note: If you make a mistake, press to erase one digit at a
time, or press and hold to clear the entire number and
return to Standby.
Using Phonebook Dialling
• Press during predial or standby.
• Use to select PRIVATE or SHARED phonebook.
• Press on the selected phonebook.
• The display reads ADD ENTRY and the first entry of the
phonebook, if any.
• Use to scroll through the records.
• Press to view the number.
• Press on the selected record to dial out the number.
Using Quick Dialling
Each key of 2, 3, 4, 5, 6, 7, 8, and 9 can be attached with a
phonebook record.
• During standby, press and hold the key will dial out the number
directly.
• The number dialled will be displayed on the LCD.
To Set the Quick Dial:
• Press during predial or standby.
• Use to select FEATURES. Press .
• Use to select QUICK DIAL.
• Press . Use to scroll through KEY 2 to KEY 9.
• Press on a selection. Use to select ON or OFF.
• Press at OFF will de-activate the quick dial feature for the
selected key.
• Press at ON will activate the quick dial feature for the
selected key. The name of the first record in the phonebook will
be displayed.
• Use to scroll through the phonebook records or use the
starting letters to select record.
• Press at a record to view the number.
• Press at the number to confirm. The quick dial feature is
activated on the selected key.
Note: If there is no record in the phonebook, press at ON will
show EMPTY.
11 of 42