Onkyo HT-RC160 - Manual (Page 8)

8
Front & Rear Panels
The actual front panel has various logos printed on it. They are not shown here for clarity.
The page numbers in parentheses show where you can find the main explanation for each item.
ON/STANDBY button (37)
This button is used to set the AV receiver to On or
Standby.
STANDBY indicator (37)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
ZONE 2 indicator (84)
This indicator lights up when Zone 2 is selected.
ZONE 2 LEVEL/TONE LEVEL buttons
ZONE 2 and OFF buttons (84)
The [ZONE 2] button is used to turn on the output
of Zone 2.
The [OFF] button is used to turn off the output of
Zone 2.
[–] & [+] buttons (51, 85)
Used to adjust the tone (bass and treble), and the
level of Zone 2.
TONE button (51)
Used to select either bass or treble.
Remote control sensor (12)
This sensor receives control signals from the remote
controller.
Display
See “Display” on page 9.
MOVIE/TV button (59)
Selects the listening modes intended for use with
movies and TV.
MUSIC button (59)
Selects the listening modes intended for use with
music.
GAME button (59)
Selects the listening modes intended for use with
video games.
DIMMER button (51)
This button is used to adjust the display brightness.
MEMORY button (54)
This button is used when storing or deleting radio
presets.
TUNING MODE button (53)
This button is used to select the Auto or Manual
tuning mode.
DISPLAY button (51)
This button is used to display various information
about the currently selected input source.
SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
Arrow, TUNING, PRESET and ENTER
buttons
When the AM or FM input source is selected, the
TUNING [ ]/[ ] buttons are used to tune the tuner,
and the PRESET [
]/[ ] buttons are used to select
radio presets (see pages 53, 54).
When the onscreen setup menus are used, they work
as arrow buttons and are used to select and set
items. The [ENTER] button is also used with the
onscreen setup menus.
RETURN button
This button is used to return to the previously dis-
played onscreen setup menu.
Front Panel