Onkyo HT-RC160 - Manual (Page 120)

En-
16
Universal Port Option Dock for iPod
® —Continued
Connect the UP-A1 to the Universal Port on your Onkyo
AV receiver as shown.
About Operation
Functionality depends on your iPod or iPhone model and
generation and your AV receiver model and generation.
Align your iPod or iPhone with the UP-A1’s dock
connector and push it down so that it’s fully seated. If
there’s a gap between the back of your iPod or iPhone
and the adapter, turn the adapter counterclockwise to
close the gap. Turning the adapter counterclockwise
moves it forward. Turning it clockwise moves it
backward.
Notes:
• Remove the case, if fitted, from your iPod or iPhone
before inserting it into the UP-A1. Otherwise, a poor
connection may result in no sound or remote control
issues.
• To prevent damage to the dock connector, don’t twist
your iPod or iPhone when inserting or removing it,
and be careful not to knock over the UP-A1 while your
iPod or iPhone is inserted.
• Don’t use the UP-A1 with any other iPod or iPhone
accessories, such as FM transmitters and
microphones, because they may cause a malfunction.
There’s no sound
• Make sure your iPod or iPhone is playing.
• Make sure your iPod or iPhone is inserted properly in
the UP-A1.
• Make sure your AV receiver is turned on, the correct
input source is selected, and the volume is turned up.
• Make sure all plugs are pushed in all the way.
FM/AM radio is noisy
• If there’s any noise when listening to FM/AM radio on
your tuner or receiver, try moving the antenna cable
away from the UP-A1 and iPod or iPhone. Also, keep
the antenna cable away from other cables.
Getting to Know the UP-A1
Connecting the UP-A1
Adapter
Dock connector
Onkyo AV receiver
Putting Your iPod/iPhone in the
UP-A1
Troubleshooting
Specifications
Weight: 170 g (6 ounces)
Dimensions (W
×
H
×
D): 83
Ч
33
Ч
74 mm
(3-1/4"
Ч
1-5/16"
Ч
2-15/16")
Remove case (if fitted)
HTP-770_EnFrEs.book Page 16 Wednesday, July 29, 2009 10:07 AM