Onkyo HT-RC160 - Manual (Page 38)

38
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time.
Carry out the settings for the AV receiver by using the
Onscreen Setup Menu.
The settings of the AV receiver can be changed using the
Display.
Onscreen Setup Menus and Display
As each item in the Onscreen Setup Menus is selected,
the selected items will be displayed one by one.
Note:
During the Audyssey 2EQ™ Room Correction and
Speaker Setup, messages, etc., that are displayed on the
TV screen will appear in the Display.
Using the Onscreen Setup Menus
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to the composite video MONITOR OUT, or the COM-
PONENT VIDEO OUT, use the AV receiver’s display
when changing settings.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
Tip:
On several functions, the explanation
will be displayed under the screen.
2 Use the Up and Down [ ]/[ ] but-
tons to select main menu item
and then press [ENTER].
The submenu appears.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return to
the previous menu.
SETUP
RECEIVER
ENTER
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Menu
Using the Display to change the
settings
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu item appears on the
display.
2 Use the Up and Down [ ]/[ ] but-
tons to select main menu item
and then press [ENTER].
The submenu item appears on the
display.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return to
the previous menu.
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Menu
Onscreen Setup Menus
Display