Oregon VR383SX3 User Manual

Page 12

To set alarm time:

1. Press and hold DISP / SET until hour value begins flashing.

2. Use Vol + / Vol - to toggle value
3. Press DISP / SET to confirm value

Turning Alarm Setting On or Off

NOTE: The alarm setting is automatically turned on when the alarm
time has been changed.

Turning Off Ringing Alarm

When the alarm sounds, press any button (except the LASER button)
to stop the ringing. It will also automatically stop after 30 seconds.

NOTE: If the voice recorder is in Recorder Mode, the alarm will not
sound even if it is enabled. Instead, the Alarm Indicator will blink for
30 seconds or until any button is pressed.

Press MODE/

INDEX

Alarm

Clock

Press MODE/

INDEX

Press VOL+ /
VOL- to turn
alarm setting

Press

DISP/SET

1. Normal Clock Operation

Press DISP/SET

Press &

hold DISP/SET

Press

DISP/SET

2. Alarm Mode

3. Change the Alarm’s Hour

4. Change the Alarm’s

Minute

5. Return to Alarm

Mode

VR383SX3 En Manl R3(V1.0) OP

12/18/04, 10:49 AM

¶´ƒ