SUUNTO Stinger User Manual

Page 79

4.6. ALTITUDE, PERSONAL AND

UNIT ADJUSTMENT SETTINGS

[AdJ]

The current Altitude and Personal Adjustment Modes

are shown when diving as well as at the surface. If the

mode does not match the altitude or conditions (see

chapter 3.2.4.), it is imperative that the diver enters the

correct selection before diving. Use the Altitude

Adjustment to select the correct altitude mode. Use the

Personal Adjustment to add an extra level of

conservatism. In this setting mode also the desired units

can be selected (metric, m/°C or imperial, ft/°F).

NOTE: New altitude and personal adjustment

selections cannot be made until 5 minutes after a scuba

dive or 2 to 60 seconds after a free/gauge dive

(depending on the sampling rate).

To set the new Altitude, Personal or Unit Adjustments:
1. In the Setting Mode [SET], press S six (6) times to

select the Altitude, Personal and Unit Adjustment Mode

(Fig. 4.15.).

Fig. 4.17. Setting Personal

Adjustment.

Fig. 4.18. Setting metric/imperial

units.