SUUNTO Stinger - Manual (Page 64)

62
3.3.4. GAUGE MODE
The Free mode automatically changes to Gauge mode
when the dive time exceeds five minutes for a single
dive. In addition to the displays shown in the Free mode
the Ascent Rate indicator is now enabled.
In the Free/Gauge mode the Dive Time in the center
window can also be used as an automatic Stop Watch.
When the SELECT button is pressed during the dive:
• A special mark, bookmark is written in the
profile memory.
• The Dive Time shown in the center window is
stopped, reset and started again.
NOTE: If you make a Gauge mode dive, it is not
possible to change between the modes within 48 hours.
Fig. 3.32. Surface display after
Free dive. Center window
showing surface time.
Fig. 3.33. Alternating surface
display after Free dive. Center
window showing the dive time
of the most recent dive.