One for All URC-7560 - Manual (Page 35)

Advanced Features
Setting up the Home Theater key
Example: To set up the key pad like this
Key Group To be controlled by
Group 1 DVD
Group 2 AUD
Group 3 TV
Group 4 TV
Group 5 VCR
Press HOME THEATER
Press and hold MAGIC until a device key blinks
twice (the device key will blink once then twice).
Press 9 7 9
Press the Play key (Group 1 will be selected)
Press the DVD key (the DVD key blinks twice)
Press the Volume (+) key (Group 2 will be selected)
Press the AUD key (the AUD key blinks twice)
Press the Channel (+) key (Group 3 will be selected)
Press the TV key (the TV key blinks twice)
Press the number 1 key (Group 4 will be selected)
Press the TV key (the TV key blinks twice)
Press the Menu key (Group 5 will be selected)
Press the VCR key (the VCR key blinks four times). You
will automatically exit the HOME THEATER
programming mode.
Now, whenever you press the HOME THEATER key:,
The Play keys (Group 1) will control your DVD player.
The Volume keys (Group 2) will control your amplifier.
The Channel keys (Group 3) will control your TV.
The Number keys (Group 4) will control your TV also.
The Menu keys (Group 5) will control your Videorecorder.
If you don’t complete a group entry within 10 seconds, the
programming will not be stored. You can exit the HOME
THEATER programming mode after completing a Group
assignment by pressing MAGIC (the device key blinks twice).
Your ONE FOR ALL 6 will store the changes entered up to that
point.
W W W.ONEFORALL.COM
33
1
2
3
4
5
6
7
8
9
10
11
12
13