One for All URC-7560 - Manual (Page 31)

W W W.ONEFORALL.COM
29
Advanced Features
Shifted Macros
You can also program your ONE FOR ALL 6 to issue a sequence
of commands by pressing the Magic key followed by another
key. This allows you to maintain the original function of this
key in every mode. You can install a Shifted Macro on any
key, except for the device keys (TV, VCR, SAT, CD, AUD
and DVD), the MAGIC key, the HOME THEATER key and
the NUMBER keys.
If for example, you want to program a shifted Macro on
the power key, simply press MAGIC once then POWER
during step 3 (see page 30).
Now everytime you press Magic, then POWER, the ONE FOR
ALL will turn off your TV, VCR or Satellite.
• To install any Shifted Macros, press:
MAGIC* + 9 9 5 + MAGIC + Key to which sequence will
be assigned + Sequence of commands + MAGIC*
• To erase any Shifted Macro, press:
MAGIC* + 9 9 5 + MAGIC + Key to be cleared + MAGIC*
*Here you must hold down MAGIC until the device key blinks
twice.
Notes:
- Make sure that you program a Macro on a spare key that you
don’t use in any mode
- Once you program a Macro on a specific key, the sequence will
work regardless of the mode (TV, VCR, SAT, CD, AUD or DVD) you
are using.
- To avoid accidental recordings with the ONE FOR ALL 6, you must
press the Record key twice to begin recording. Because of this,
you cannot assign a Macro or Shifted Macro to the Record key
(for example the Record key).
- If you had to hold down a key for a few seconds on the
original remote control to get a function, this function may
not work in macro on your ONE FOR ALL remote.
- If a Shifted Macro is placed on the Mute, Channel and
Volume keys then Scan and Colour/Brightness will be
sacrificed.