One for All URC-7560 - Manual (Page 12)

10
W W W.ONEFORALL.COM
After you have used the Search Method, you can find out
which code the ONE FOR ALL responded to by blinking back
the code. It is useful to know the device code for future
reference. Remember, you can only blink back your code
after the ONE FOR ALL is operating your device.
To blink out your Television code:
Press TV once.
Press and hold MAGIC until the ONE
FOR ALL 6’s TV key blinks twice (The TV
key will blink once and then twice).
Press 9 9 0. The TV key will blink twice.
For the first digit of your four-digit code,
press 1 and count all the red blinks.
If there are no blinks, the digit is "0".
For the second digit, press 2 and count
all the red blinks.
If there are no blinks, the digit is "0".
For the third digit, press 3 and count all
the red blinks.
If there are no blinks, the digit is "0".
For the fourth digit, press 4 and count
all the red blinks. If there are no blinks,
the digit is "0". Now you have your four-
digit code.
Make sure you write your Television code in the boxes
provided in the battery compartment and on page 11
for easy future reference.
Installation
6
4
5
1
2
3
7
TV
Important note: To blink back the code for your other devices
press the appropriate device key during step 1.