Olympus C-1 D-150 - Manual (Page 32)

32
Operating Procedure
1.
Check that the lens barrier is closed and
the camera is set to the Playback mode by
holding down the monitor button for a
moment.
2.
Press the OK/menu button.
¼ The monitor shows the Playback mode menu 1/3.
3.
Press the or arrow pad key to display the menu
3/3, and select .
4.
Adjust to the desired brightness by pressing
the (+/to brighten) or (–/to darken) arrow pad key.
5.
Press the OK/menu button.
¼ All the images will be displayed at the set brightness.
3 / 3
END OK SELECT
Playback mode menu 3/3 screen
SET OK SELECT
Monitor adjustment screen
í
Adjusting the Monitor Brightness
You can adjust the brightness of the monitor to make it easier to see when shooting
under daylight or in the dark, as well as when viewing images on the monitor.
Arrow pad
OK/menu button
Playback mode menu 1/3 screen
Monitor button
1 / 3
SET OK SELECT
NO
OFF
NO
NO