System accessories, Ps4ac breaker panel, Ps4dc breaker panel – Outback Power Systems Systems User Manual

Page 18

OutBack Power Systems Inc.

2005

System Accessories

PS4

Th e PS4 series is the ideal AC and DC enclosure system for medium to large

size renewable energy power conversion system. Th e PS4 is comprised of two

compact enclosures for all of your system’s AC and DC components. It saves

time, money and space by combining disconnects, over-current protection

devices and control components into easy-to-install enclosures.

Th e PS4 is capable of supporting up to four OutBack FX series inverter/chargers, six MX60 charge controllers, a MATE

system controller and all the required AC and DC components and wiring.

Th e OutBack PS4 system can be fully customized to your application and ordered pre-wired or as individual

components for ﬁ eld assembly.

PS4AC Breaker Panel

Th e PS4AC is a NEC compliant enclosure engineered to contain all the AC overcurrent protection

and power management components.

• ETL listed indoor type powder coated steel enclosure with plenty of knockout and mounting

provisions for a variety of OutBack products.

• Available without the AC bypass assembly included (PS4AC) (Order all required AC breakers separately)

• Available with a four FX inverter ready 60 amp 120/240VAC AC bypass assembly (PS4-IOB-60Q) for

systems with AC generators or utility grid connections up to 15 kW

• Available with a four FX inverter ready 100 amp 120/240VAC AC bypass assembly (PS4-IOB-100Q)

for systems with large AC generators or grid connections over 15kW

• Available with a four FX inverter ready 60 amp 230VAC 50 Hz AC bypass assembly (PS4-IOB-60QE)

for export applications

• Ground terminal bus bar bonded to cabinet

• One white insulated AC neutral terminal bus bar

• Two black insulated AC hot/leg 1 terminal bus bars

• Two red insulated AC hot/leg 2 terminal bus bars

• Complete wiring kit is included when the AC bypass kit is included or ordered separately

• Space provided for up to 13 additional OutBack AC load breakers

• Provisions for mounting an X-240 autotransformer and optional cooling fan

• Knockouts on ﬁ ve surfaces to facilitate conduit and inverter connections

PS4DC Breaker Panel

Th e PS4DC is a NEC compliant enclosure engineered to contain all the DC overcurrent

protection and power management components.

• ETL listed indoor type powder coated steel enclosure with plenty of knockout and mounting

provisions for a variety of OutBack products.

• Available without any DC breakers included (PS4DC) (Order all required DC breakers separately)

• Also available with one inverter/battery DC breaker included standard (PS4DC-175 amp

or PS4DC-250)

• Space provided for up to four large breakers (175 or 250 amp) or six medium breaker (100 or

125 amps) - can also be combined as two large and three medium breakers

• Space provided for an additional ten small breakers (1 to 80 amps 150 VDC rated) as well as

the OutBack PV-GFP/2 ground fault protection system

• 500 amp 50 mVolts DC current shunt standard

• One combined negative/ground bus bar attached to the DC shunt included standard

• One positive terminal bus bar (TBB-R) for DC loads or PV array combining included standard

• Can be used for negative or positive ground systems

• Knockouts on ﬁ ve surfaces to facilitate conduit and inverter connections