Auto transformer, Psx-240 – Outback Power Systems Systems User Manual
Page 12
28
l
OutBack Power Systems Inc.
2005
10
PSX-240
Th e OutBack PSX-240 auto transformer can be used for step-up, step-down,
generator and split phase output balancing or as a series stacked inverter to
load balancing auto-former. Incorporating a transformer with 120 volt/30
amp primary and secondary side, a temperature activated cooling fan and a
25 amp dual breaker in a steal enclosure, the PSX-240 is ready to install in
your custom application. Use for 120 or 240 VAC 60 Hz systems only.
Powering 240 volt items like deep well pumps with a single 120 volt
inverter is possible thanks to the PSX-240’s step-up capability. Its step-down feature
allows you to charge your batteries with a 240 volt generator through a single 120 volt inverter.
Th e PSX-240’s ability to balance the output of series stacked inverter/chargers makes it a critical item when
using the OutBack stacking 120/240 VAC confi guration.
Th e X-240 is also available without the enclosure, for installation inside the PS2AC or PS4AC enclosures.
Auto Transformer
Step-Up
Step-Down
Generator Balancing
OutBack Balancing
240 VAC
Loads
120 VAC
Loads
120/240 VAC
Loads
120/240 VAC
Loads
Inverter/Charger
PSX-240
PSX-240
Inverter/Charger
120/240 VAC Generator
PSX-240
Inverter/Charger
Inverter/Charger
PSX-240
120/240 VAC Generator
120/240 VAC Generator