Oki JOB60851 - Manual (Page 59)

Chapter 4 Software Development
page 4-24
This concludes the description of Port 7. To use the port, manipulate the above registers within the
program. For further details on registers for other ports and Port 7 operation, refer to Chapter 5 in the
MSM6657 Family User's Manual.
4-4-2. Changing LED2 Color
The next page gives sample code (port7exp.c) that changes the color of the LED connected to Port 7.
This sample program calls std_init_573(), a support function for initializing the MSM66Q573 on the
JOB60851 board, so be sure to include the corresponding source code file (stdrw573.c) on the
compiler command line.
CL665S /T m66573 /H /WIN port7exp.c stdrw573.c l66ks50s.lib
This sample program uses the secondary function, serial port, for Port 7's lowest four bits to send
character strings to the terminal emulator running on the host personal computer by setting the lower
halves of Port Mode (P7IO) and Port Secondary Function Control (P7SF) Registers to the following
values.
P7IO = 0xC2; /* 1100_-010 */ /* Configure Port 7 pin 1 for output */
P7SF = 0x03; /* 0000_-011 */ /* Configure Port 7 pins 1 and 0 for secondary function */
See Section 4.5 "Standard I/O over Serial Link" below for a different approach.