Oki JOB60851 - Manual (Page 15)

Chapter 2 Putting Board through its Paces
page 2-2
2-1. Setup
2-1-1. Configuring JOB60851 Board
Make sure that the switches and jumpers numbered 4, 7, 8, and 9 in Figure 2.1.1 are all in their
factory default positions, B.
Figure 2.1.1. JOB60851 Board, Top View
(1) AC adapter jack (6) Serial (RS-232C) connector
(2) Power switch (7) Clock selection jumper
(3) Flash writer connector (8) Power supply jumpers
(4) Flash writer selection switch (FW-SEL) (9) Power supply jumpers
(5) USB connector (10) Indicator LEDs (LED1 and LED2)
(11) User connectors (CN1 and CN2)