Onkyo HT-S4100 - Manual (Page 49)

49
Using the Listening Modes
See “About the Listening Modes” on page 50 for
detailed information about the listening modes.
Selecting on the AV receiver
■ [STEREO] button
This button selects the Stereo listening mode.
■
LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
■
[STEREO] button
This button selects the Stereo listening mode.
■ [SURROUND] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
• While a pair of headphones is connected,
you can select only the Mono, Direct, or Ste-
reo listening mode.
• While speaker B is on, you can select only
the Direct or Stereo listening mode.
• The listening modes cannot be selected
while speaker set A is off.
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
MASTER VOLUME
A SPEAKERS B
STEREO
LISTENING MODE
SETUP RETURN
PLAYLIST PLAYLIST
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 645S
LISTENING MODE
DISPLAY
TEST TONE CH SEL
SURROUND STEREO
CINE FLTR
LEVEL+ LEVEL-
L NIGHT
,
STEREO
SURROUND