Common functions, Using headphones, Setting the display brightness – Onkyo HT-S4100 User Manual
Page 46: Adjusting the bass & treble, Utton (46), K (46), Uttons (46), Using headphones setting the display brightness
46
Common Functions
This chapter explains functions that can be used with any input source.
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the AV receiver’s PHONES jack for pri-
vate listening, as shown.
Notes:
• Always turn down the volume before connecting your
headphones.
• Speaker sets A and B are turned off while the head-
phones plug is inserted in the PHONES jack.
• When you connect a pair of headphones, the listening
mode is set to Stereo, unless it’s already set to Mono,
Stereo, or Direct.
• When the multichannel DVD input is selected, only
the front left and front right channels can be heard in
the headphones.
With this function, you can adjust the brightness of the
display.
You can adjust the bass or treble for speaker set A’s front
speakers, except when the Direct listening mode is
selected.
■
Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
■
Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
Note:
• To bypass the bass and treble tone circuits, select the
Direct listening mode.
Using Headphones
Setting the Display Brightness
Press the [DIMMER] button
repeatedly to select: dim, dim-
mer, or normal brightness.
Alternatively, you can use the [DIM-
MER] button on the AV receiver (not
European models).
TONE
+
STEREO
LISTENING MODE
DISPLAY DIGITAL INPUT
DIMMER
MEMORY TUNING MODE
RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES
MULTl CH
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
TUNER
CD
MASTER VOLUME
A SPEAKERS B
TONE, –, +
PHONES
DIMMER
STANDBY/ON
PHONES
A SPEAKERS B
DIMMER
AV receiver
Remote
controller
DIMMER
Adjusting the Bass & Treble
1
Press the AV receiver’s [TONE]
button repeatedly to select either
Bass or Treble.
Use the TONE [–]/[+] buttons to
adjust.
PREVIOUS
GUIDE
--/---
TAPE
ON/STANDBY
DIMMER
SLEEP
INPUT SELECTOR
REMOTE MODE
V
1
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
VOL
HDD
CDR
MD
DVD
RECEIVER
C D
+10
0
CLR
1
2
3
4
5
6
7
8
9
CH
DISC
ALBUM
DIMMER
Press
[RECEIVER]
first
TONE
+
AV receiver