Playing your av components, Basic av receiver operation, Ol (40) – Onkyo HT-S4100 User Manual
Page 40: Uttons (40), Uttons (40, Utton (40)
40
Playing Your AV Components
Basic AV Receiver Operation
TONE
+
STEREO
LISTENING MODE
DISPLAY DIGITAL INPUT
RT/PTY/TP MEMORY TUNING MODE
RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES
MULTl CH
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
TUNER
CD
MASTER VOLUME
A SPEAKERS B
DISPLAY
MULTI CH
1
2
4
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SP A / B
PLAYLIST
PLAYLIST
--/---
TAPE
ON/STANDBY
DIMMER
SLEEP
INPUT SELECTOR
REMOTE MODE
V
1
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
VOL
HDD
CDR
MD
DVD
RECEIVER
C D
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
ALBUM
4
1
1
2
OUTPUT LEVEL
MAX
MIN
4
Subwoofer’s
rear panel
1
Use the AV receiver’s input selector buttons to select the input source.
To select the input source with the remote controller, press the
[RECEIVER] button, and then use the INPUT SELECTOR buttons.
On the remote controller, the [V1], [V2], and [V3] buttons select the VIDEO 1/VCR,
VIDEO 2, and VIDEO 3 input sources respectively.
2
Use the SPEAKERS [A] and [B] buttons on the AV receiver or the [SP A/B]
button on the remote controller to select the speaker set that you want to
use.
Pressing the remote controller’s [SP A/B] button cycles through the following settings:
Speaker Set A
→
Speaker Set A&B
→
Speaker Set B
→
Off.
The A and B speaker indicators show whether each
speaker set is on or off.
Note that when speaker set B is turned on, speaker
set A is reduced to 2.1-channel playback.
3
Start playback on the source component.
When you select DVD or another video component, on your TV you’ll need to select
the video input that’s connected to the AV receiver’s MONITOR OUT.
4
To adjust the volume, use the MASTER VOLUME control, or the remote
controller’s [VOL] button.
The volume can be set to MIN, 1 through 79, or MAX. The AV receiver is designed for
home theater enjoyment and has a wide volume range for precise adjustment.
Note
: When the subwoofer volume level is set to a positive (+) value, the maximum
master volume level is reduced proportionally.
To set the level of the subwoofer, use the OUTPUT LEVEL control.
Because our ears are less sensitive to very low bass sounds, there’s a temptation to set
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.
5
Select a suitable listening mode and enjoy!
See “Using the Listening Modes” on page 49.
RECEIVER
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
TUNER
CD
V
1
V
2
V
3
C D
TAPE
TUNER
DVD
Remote
controller
AV receiver
A SPEAKERS B
SP A / B
Remote
controller
AV receiver
Indicators
VOL
MASTER VOLUME
Remote
controller
AV receiver