Omron Healthcare INTELLISENSE HEM-705CP - Manual (Page 22)

TITLE
22 22
TITLE
TITLE
TROUBLESHOOTING TIPS
PROBLEM CAUSES SOLUTIONS
No power.
Worn batteries
Incorrect battery
installation
Replace all 4 "AA" batteries.
Reference page 7.
Check the battery installation or
proper placement of the battery
polarities.
No data will print.
Printer not connected
Cable plug not inserted
correctly or damaged.
No measurement values
are stored in the memory
Connect printer to BP Monitor.
Insert cable plug in correct
position. Reference page 8.
Contact Customer Service for
repair information.
Make sure the date and time is
set-up in the monitor. Take a
reading then print.
Reference page 17.
Not all data stored in
the memory will print.
POWER/ACTIVE
Light is blinking
Worn batteries. Replace all 4 "AA" batteries.
Reference page 7.
Printer paper will
not feed.
Printer paper jammed.
Ran out of paper.
Remove jammed paper and install
roll again. Reference page 9.
Install new roll of paper.
PRINTER UNIT:
HEM-705CP-IM-US 7/19/05 9:26 AM Page 22