Omron Healthcare INTELLISENSE HEM-907XL - Manual (Page 12)

12
FEATURES AND FUNCTIONS
ON/OFF
START
STOP
HIDE
AC
P-SET
100
AUTO
140 180
220
260
280
MODE
AVG. MANU.
CHECK
SINGLE
XL ®
ON/OFF
START
STOP
HIDE
AC
P-SET
100
AUTO
140 180
220
260
280
MODE
AVG. MANU.
CHECK
SINGLE
XL ®
ON/OFF
START
STOP
HIDE
AC
P-SET
100
AUTO
140 180
220
260
280
MODE
AVG. MANU.
CHECK
SINGLE
XL ®
List of Functions for each Mode
Inflation level set-
ting
Non-display func-
tion
Manual deflation
control
Single (SINGLE)
Mode
Average
(AVG) Mode
Auscultation
(MANU) Mode
Check
(CHECK) Mode
Function
Measurement
Mode
(4) AVG Function setting
You can set the number of measurements, the waiting time until the 1st measurement, and the
measurement interval for the AVG Mode.
Items to set Set value
F1 Number of measurements 2 times or 3 times
F2 Waiting time until the start of 1st measurement 0 sec, 3 min, 5 min, or 10 min.
F3 Measurement interval 5 sec, 30 sec, 1 min, or 2 min.
Note: The bold letters represent the factory-set values.
Procedure to change the set values
1) When the power is OFF, push the ON/OFF (power) Button for
more than three seconds while holding the START Button;
F1 is displayed.
2) Push the START Button and select the function to set from
F1 to F3. Each time you push the START Button, the func-
tions change in the order of
.
3) Push the DEFLATION (deflation control)/Measurement Result
Display Switch Button and change the set values.
4) When the setting is finished, push the ON/OFF (power)
Button to turn off the power. The setting is changed.
min
sec
Function #
HEM-907-Z2_E_M.qxd 09.8.28 11:45 AM Page 12