Onkyo CDR-205X User Manual
Page 31
31
Operations
Removing a SKIP command
1
Insert the CD-R or CD-RW with the SKIP
command into the CDR-205X.
2
Press the SKIP PLAY button.
The SKIP ON indicator turns off.
Placing and removing SKIP commands
Note:
If the SKIP ID CLEAR button is pressed while a
track without a SKIP command is being played,
then the CDR-205X will search for the next track
with a SKIP command.
5
Press the SKIP ID CLEAR button again.
The SKIP command is removed.
3
Play the track where you want to
remove the SKIP command.
Memo:
When a track is played that already has a SKIP
command, the SKIP indicator will light.
SKIP PLAY
4
Press the SKIP ID CLEAR button.
The track is played again. The track number and
the message "Skip Clear?" flash alternately in
the display.
6
To remove a SKIP command from
another track, repeat steps 3 to 5.
7
Press the r button.
After the SKIP command is removed from the
disc (a few seconds), the disc tray opens.
SKIP
ON
Memo:
By pressing q or w (or turning the AMCS
dial), you can jump to tracks before or after that
have a SKIP command.
To stop the removal of a SKIP command
Press the e or SKIP ID SET button.
Turns
off
→
SKIP ID
CLEAR
SET
SKIP
SKIP ID
CLEAR
SET