Onkyo CDR-205X - Manual (Page 24)

24
Analog recording
Perform analog recording to record the signal input
to the analog input terminal of the CDR-205X. The
recording level can be adjusted manually.
Preparation
• Turn on the CDR-205X (see page 15).
• Place a recordable CD-R or CD-RW in the CDR-
205X (see page 16).
• Verify that the input dial and recording selection
button of the amplifier are set to the position of
the recording source.
1
Repeatedly press the INPUT button
until "Analog In" appears.
AUDIO CD RECORDER
ON / OFF
STANDBY
CDR-205X
CD DUBBING
DISPLAY PUSH TO ENTER ( )
AMCS
REC
FINALIZE
INPUT
EDIT/NO
YES
DUAL OPTICAL INPUT
POWER
TION OPERA
RANDOM
MEMORY
T REPEA
REC
1 2 3
4 5 6
7 8 9
10 / 0 >10
SKIP ID
CLEAR
CLEAR SET DISPLAY SKIP PLAY
CLOCK SLEEP EFFECT G.EQUALIZER
TUNER
MODE POWER
FM AM INPUT PRESET
TAPE
DVD PAUSE/STEP
MD
CD
SCROLL REPEAT
CLEAR PLAY MODE
RANDOM REPEAT
REC
CLEAR DISC MEMORY
CDR REPEAT
TIMER
UP/DOWN
ENTER
CLEAR REC
PLAY MODE
TONE
1 2 3
4 5 6
7 8 9
- - / - - - 10/0
MUTING
VOLUME
PRESENCE
OFF 1 2 3
ACOUSTIC
REMOTE CONTROLLER RC-414S by
RC-413C RC-414S
INPUT
REC o
o REC
s
s
REC o
EDIT/NO n
YES q AMCS w
2
Adjust the recording level
(see page 29)
3
Press the o REC button (or the remote
controller REC o button).
“Rec Setup” appears in the display followed by
the time display (the recording standby state).
4
Press the n button (or the remote
controller s button) and start the
recording source.
Recording starts.
The level sync function turns off.
If the entire disc becomes filled with recordings,
the CDR-205X automatically stops.
To set the track numbers manually when the
level sync function is turned off
Press the oREC button.
To pause the recording
Press the n button (or the remote controller g
button). To resume recording, press the n button
(or the remote controller s button).
To stop the recording
Press the e button.
INPUT
REC
REC
REC
CDR-205X RC-413C RC-414S