Onkyo CDR-205X - Manual (Page 15)

15
Connections
Turning on the power
When the CDR-205X is connected to a component system, it has three different
states of on or off.
Power on: The ON/OFF switch is depressed (ON) and the remote controller or other system components are
not turned off. The STANDBY indicator is turned off.This is the condition for normal operation.
Standby: The ON/OFF switch is depressed (ON) and the remote controller or other system components are
turned off. The STANDBY indicator is turned on. When in the standby state, if the remote controller or
other system components are turned on, the CDR-205X automatically turns on and system operation
begins.
Power off: The ON/OFF switch is released (OFF). In this condition, the CDR-205X will not operate even if the
remote controller or other system components are turned on.
The CDR-205X turns on and the display
illuminates.
2
Press the POWER button on the remote
controller (press the STANDBY/ON
button of the R-805X to put the R-805X
in standby).
The standby indicator lights and the CDR-205X
enters the standby state.
Operating the power supply
1
Press in the ON/OFF switch.
3
Press the POWER button on the remote
controller (press the STANDBY/ON
button of the R-805X to turn on the
R-805X).
The STANDBY indicator turns off and the CDR-
205X turns on again.
4
Press ON/OFF switch to release it.
The CDR-205X turns off.
STANDBY
STANDBY
ON/OFF
The STANDBY indicator
turns off.
STANDBY
ON/OFF
STANDBY
Note:
When the ON/OFF switch is in the OFF position,
the CD recorder is still consuming some power. If
you wish to disconnect your player completely
from the mains, withdraw the plug from the AC
outlet.
POWER
RC-413C
POWER
RC-413C