Omega Engineering RD260A - Manual (Page 21)

4-1
4
T
roubleshooting
4.1 Error Messages
Error Code List
Please contact the dealer from which you purchased this recorder in case the following
errors appear. See the Technical Manual , Section 6, for more error messages.
Error Codes Meaning Recovery
Main memory reading error.
Main memory writing error.
A/D converter memory reading error.
A/D converter memory writing error.
Calibration data error of A/D converter.
System ROM failure.
System RAM failure.
Ribbon shift, ribbon feed failure (dot model).
Printer failure (dot model).
Range memory reading/writing error.
System failure.
Entered value exceeds allowable setting range. Enter correct data.
Contact OMEGA Engineering.
Chapter 4 Troubleshooting