Omega Engineering RD260A - Manual (Page 14)

2-4
2.4 Loading Chart Paper
Installing / Replacing Chart Paper
1. Open the front door of the recorder, as shown below.
2. Make sure that recording is OFF. Power may be ON.
3. Riffle the chart thoroughly before loading.
4. While gently pressing the chart-cassette stoppers, located at both front ends of the
cassette, lift and draw the cassette out of the recorder case.
Stoppers
5. Open the chart retainer backward on the cassette.
6. Pull and open the front transparent chart guide.
Chart guide (transparent plastic plate)
Chart retainer
CAUTION
• If you replace the chart paper compartment back into the unit without closing the
front transparent chart guide, the lock tabs might be damaged.