Oki 8300E C6100 User Manual
Page 35
OkiLAN 8300e Network User’s Guide, C6000n and C6100 Series
Configuration - 35
Printer Trap
Setup . . .
Detail . . .
Cover Open
Set sending a Trap,
enabled or
disabled, when the
printer cover
opens.
Printer Error
Set sending a Trap,
enabled or
disabled, when any
errors occur.
IPX
Set node address and network address
to which a Trap packet will be sent.
Detail . . .
By selecting the Detail button, the
following items can be configured:
Trap Enable
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Printer Reboot
Set sending a Trap,
enabled or
disabled, when the
printer restarts.
Receive Illegal
Set sending a Trap,
enabled or
disabled, when
illegal data is
received.
On-line
Set sending a Trap,
enabled or
disabled, when the
printer turns to
On-Line.
Off-line
Set sending a Trap,
enabled or
disabled, when the
printer turns to
Off-Line.
Paper Out
Set sending a Trap,
enabled or
disabled, when
paper is out.
Paper Jam
Set sending a Trap,
enabled or
disabled, when a
paper jam occurs.
Location
Comments