Onkyo HT S5100 - Manual (Page 88)

88
Controlling Other Components —Continued
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TAPE] REMOTE MODE button is preprogrammed
with the remote control code for controlling an Onkyo
cassette recorder when used with an
connection.
For details on entering a remote control code for a differ-
ent component, see page 82.
On twin cassette decks, only Deck B can be controlled.
A ON/STANDBY button
Turns the cassette recorder on or off.
B Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [
] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [
]/[ ] buttons may not work prop-
erly with some cassette tapes.
C Rewind and Fast Forward [ ]/[ ] buttons
The Rewind [ ] button starts rewind. The Fast
Forward [ ] button starts fast forward.
D Reverse Play [ ] button
Starts reverse playback.
E Play [ ] button
Starts playback.
F MUTING button (48)
Mutes or unmutes the AV receiver.
G VOL [ ]/[ ] button (47)
Adjusts the volume of the AV receiver.
H Stop [ ] button
Stops playback.
Note:
• An Onkyo cassette recorder connected via can
also be controlled in Receiver mode.
Controlling a Cassette Recorder
5
3
2
A
2
F
G
3
H
4
TAPE
Press the appropriate
REMOTE MODE button first
* With some components, certain buttons may not
work as expected, and some may not work at all.