Omron Healthcare AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR HEM-703CP - Manual (Page 6)

5
Preparations for Use
4 How to Set the Printing Paper
Please be sure not to print without inserting
printing paper as it will shorten the life span
of the printer head .
1 . Slide the plastic printer cover in the
direction indicated by the arrow symbol
and remove it from the main unit .
4 . Insert the printing paper in the installation
section, and then attach the cover back to
the main unit in such a way that the edge
of the paper protrudes from the cover .
5 . When the PRINT/PAPER FEED button
is pressed while the results of the
measurement are shown on the digital
display, these results, together with the
date and time of measurement are printed
out .
6 . When purchasing printing paper, ask at the
shop where you purchased the main unit
for further supply . Other brands of paper
may be used providing the dimensions are
smaller than 38mm wide and 20mm in di-
ameter . However the printing quality may
differ a little .
2 . Peel off the glued edge of the prontlng
paper included with the unit, and cut it off
to about 2 inches with a pair of scissors,
and then shape and cut the edge for easy
insertion to the printer as shown in the
figure .
3 . Press the PRINT/PAPER FEED button
while inserting the edge of the printing
paper to the paper feeding slit . When the
edge of the paper protrudes sufficiently,
release the button and stop feeding .
Inserting Direction
Reverse
Front