Oki LAN 510W - Manual (Page 18)

18 Configuration: Infrastructure Mode
C
ONFIGURATION
:
I
NFRASTRUCTURE
M
ODE
IP A
DDRESS
_______________________
For the Wireless Card
The IP Address for the wireless card is set automatically. It
appears on the wireless card Network Summary printout (see
page 4) under TCP/IP Configuration.
To set the IP Address manually, use the printer menu:
1. With
Ready to Print
on the display, press E
NTER
to switch to the
Menu Mode.
2. Use the ∇ and ∆ buttons to scroll to [Admin Setup]. Press
E
NTER
.
3. Use the ∇, ∆ and E
NTER
buttons to enter your 4-digit
password (default is 0000). Press E
NTER
.
4. Use the ∇, ∆ and E
NTER
buttons to scroll to
[Network Setup] → [Slot2:Wireless] → [IP Address Set],
then select [Manual]. Press E
NTER
.
5. Use the ∇, ∆ and E
NTER
buttons to enter the IP Address.
Press E
NTER
.
6. Press B
ACK
.
NOTE
These instructions assume the following:
• You have connected the printer’s built-in print server to
a computer via an access point.
• You have configured both the printer’s and computer’s
IP Address, Subnet Mask and Default Gateway.