Olympus DS3300 - Manual (Page 57)

57
4
1 Insert end A of the USB cable to your PC’s USB
port or USB hub.
2 Connect end b of the USB cable to the cradle.
3 Turn ON the recorder, then set the recorder in
the cradle.
If “REMOTE” is displayed on recorder, it indicates proper
connection.
Connecting to Your PC Using the
Cradle
Connection to
Y
our PC
..............................................................................................................................................................
Notes
• Never touch the contact points at the bottom of the cradle, as that may cause bad connection.
• With a PC connected, the recorder cannot be operated with the foot switch (RS25/26). When connecting
the recorder to a PC via the cradle, remove the foot switch.