User controls, Management – Optoma Single Chip DLP Projector User Manual
Page 25
25
E
nglish
Menu Location
Choose the Menu location on the display screen.
Projection
4
Front-Desktop
The factory default setting.
4
Rear-Desktop
When you select this function, the projector reverses the image
so you can project behind a translucent screen.
4
Front-Ceiling
When you select this function, the projector turns the image
upside down for ceiling-mounted projection.
4
Rear-Ceiling
When you select this function, the projector reverses and turns
the image upside down at same time. You can project from
behind a translucent screen with ceiling mounted projection.
Signal Type
Select signal type between RGB, HDTV and Component video
sources.
Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
Lamp Reset
Reset the lamp setting only when the new lamp is replaced.
Management
Lamp Reminding
Lamp Reset
HDTV
Computer / Video mode
Menu Location
Component
RGB
Projection
Signal Type
Audio
Image-I
Image-II
Language
Management
PIP
User Controls
v
The OSD does not
include a PIP menu
under Video mode.