Optoma Single Chip DLP Projector - Manual (Page 12)

12
E
nglish
Installation
Elevator Button
Elevator Foot
The projector is equipped with an elevator foot for adjusting the
projector height.
To raise the projector:
1. Press the elevator button
Π.
2. Raise the projector to the desired display angle

, then
release the button to lock the elevator foot into position.
3. Use
Ž
to fine-tune tilt-adjustment.
To lower the projector:
1. Press the elevator button.
2. Lower down the projector, then release the button to lock the
elevator foot into position.
3. Use
Ž
to fine-tune tilt-adjustment.
Adjusting the Projected Image
Adjusting the Projector Height
1
2
3