Onkyo DV SP504 - Manual (Page 55)

55
Additional information
Use this procedure to reset all the player’s settings to the
factory default.
You can adjust the brightness of the display as follows.
All DVD-Video discs carry a region mark on the case
somewhere that indicates which region(s) of the world
the disc is compatible with. Your DVD player also has a
region mark, which you can find on the rear panel. Discs
from incompatible regions will not play in this player.
Discs marked “ALL” will play in any player.
The diagram below shows the various DVD regions of
the world.
■
DVD-Video Format
DVD-Video discs contain titles, which are usually subdi-
vided into chapters.
■ DVD-Audio
DVD-Audio discs contain groups and tracks.
■
SACD
SACDs have two separate areas for storing audio
tracks—one for multichannel audio, the other for 2-
channel stereo audio. In addition, hybrid SACDs have an
extra layer for playback in standard CD players. You can
specify how the DVD player handles SACDs on page 50.
■ VCD
VCDs contain video tracks.
■ Audio CD Format
Audio CDs contain tracks.
Resetting the player
1 Turn on the DVD player.
Wait until “ONKYO DVD” has disap-
peared from the display.
2 Using the front panel buttons, hold
down the Stop [
] button and
press [STANDBY/ON] button.
“INITIALIZE” appears on the display.
When the reset is complete, “COM-
PLETE” is displayed, and the DVD
player enters Standby mode.
Adjusting the Display Brightness
1 Press the [DIMMER] button
repeatedly to cycle through the
following options:
dim, dimmer, normal.
DVD-Video regions
ANDBY ST
STANDBY/ON
1
2
2
5
5
6
3
2
1
4
4
Disc Content Organization
Title 1
Chapter 1 Chapter 2 Chapter 1 Chapter 2
Title 2
DVD-Video
DVD-Audio
Group 1
Track 1
Group 2
Track 2 Track 3 Track 1 Track 2
CD layer of a hybrid SACD
Multichannel area Stereo area
Track 1 Track 2 Track 3
SACD
Track 1 Track 2 Track 3
Video CD
Track 1 Track 2 Track 3 Track 4
Audio CD
Track 1 Track 2 Track 3 Track 4 Track 5