Oricom pro600 DECT - Manual (Page 19)

17
Using the menu
Base settings
Base Ringing melody
There are 10 different ringing melodies available.
, or , Open the Menu, select "Base settings"
Select "Ring tone"
3 The current setting is shown
or , save Select and confirm a ringing melody
Base Ringing volume
There are 5 ringing volume settings available and "OFF".
, or , Open the Menu, select "Base settings"
, Select "Ringer volume"
Level 3 The current setting is shown
or , save Select and confirm a ringing tone volume
or "Off"
Shaker
You can plug a shaker accessory (VIB100 not included)
into the socket on the back of the base. This can be
purchased separately from the reseller where you
purchased the product, or directly from Oricom (Australia).
With this feature turned "ON" the shaker will vibrate when
you receive an incoming call.
, or , Open the Menu, select "Base settings"
, Select "Shaker"
On The current setting is shown
or , save Select and confirm "On" or "Off"
System PIN
, or , Open the Menu, select "Base settings"
or , Select "System PIN"
, Enter the old PIN and confirm it
2x , Enter the new PIN and confirm it
Pro_600_800.indd 17 2008-11-11 16:17:38