Oricom pro600 DECT - Manual (Page 16)

14
Using the menu
Handset
Handset Ringing melody
There are 10 different ringing melodies available.
, or , Open the Menu, select "Handset"
Select "Ring tone"
or , Select "External" or "Internal (intercom)"
Melody 8 (External),
Melody 8 (Internal)
The current setting is shown
or , Save Select and confirm a ringing melody
Handset Ringing volume
There are 5 ringing volume settings available and "OFF".
, or , Open the Menu, select "Handset"
, Select "Ringer volume"
Volume 3 The current setting is shown
or , Save Select and confirm a ringing tone volume
or "OFF"
Equaliser
Use the Equaliser feature to adjust the tone and high
frequencies until they are right for you.
, or , Open the Menu, select "Handset"
or , Select "Equaliser"
or , Save Adjust the settings and confirm
You can also adjust the equaliser settings when you
are in a call. Press the middle of the
key to
switch between the volume control and the Equaliser.
When the equaliser screen is displayed, use the up or
down of the
key to adjust the setting.
Boost Memory
With this feature set to "On" if you use the , button,
your handset will remember and use your last Boost
setting for each call.
, or , Open the Menu, select "Handset"
or , Select "Boost memory"
Off The current setting is shown
or , Select and confirm "On" or "Off"
Pro_600_800.indd 14 2008-11-11 16:17:37