Oricom pro600 DECT - Manual (Page 15)

13
Using the menu
Changing the Profile "Equaliser" setting
or , Select "Equaliser"
or , save Select and confirm
Press the key to return to standby.
Copy a User Profile
You can copy a user profile to another compatible,
registered handset.
, or , Open the Menu, select "Profile"
or , Select "Profile 1 or 2"
or , Select "Copy"
< > 2, 3, 4 Select the handset
or Confirm or cancel
Selecting a Profile for use
Incoming calls
When you receive an incoming call and before you
answer the telephone, press the M1 or M2 key for the
profile you wish to use.
The display will confirm the profile that has been
selected and you can answer the call as normal.
Outgoing calls
When you wish to make an outgoing call, press and hold
the M1 or M2 key for the profile you wish to use. The
display will confirm the profile that has been selected
and you can now make your outgoing call as normal.
User profiles cannot be selected in Handsfree mode.
If you do not dial your outgoing call within 30 seconds
of pressing the M1 or M2 key, the selected profile will
timeout and the default telephone settings will be used
for the call.
Pro_600_800.indd 13 2008-11-11 16:17:36