Sylvania SRZ3000 - Manual (Page 46)

Some messages are displayed on the screen during
channel changing or during programs.
When STB cannot receive a channel signal, the
whole screen becomes gray, then NO SIGNAL
appears in the center.
This may occur when:
• the signal is too weak
• the channel is not broadcasting
• the antenna cable is not connected
Screen:
When STB is trying to receive a signal, the whole
screen becomes gray, then SCANNING appears in
the center.
When you have set V-CHIP and you receive a
program that meets any setting of yours, the whole
screen becomes gray, then RESTRICTED
PROGRAM appears in the center.
Please refer to “Setting for V-CHIP/CC” on page 80
for further information.
NOTE:
Press INFO button to verify the rating of a program
currently being received.
Remote:
Cowboy
RESTRICTED PROGRAM
51-1 No description provided.
TV-14 D
No description provided.
ENGLISH STEREO
The rating of this program
RESTRICTED PROGRAM
RESTRICTED PROGRAM
SCANNING
26-1
SCANNING
NO SIGNAL
26-1
NO SIGNAL
On screen messages
46
EN
1A23
Basic Operation
ST200.qxd 03.3.19 7:05 PM Page 46