Oki MB 460 - Manual (Page 39)

39 • Getting Started
• For single-sided printing on headed paper load the paper into the multi
purpose tray with pre-printed side up and top edge into the MFP.
• For two-sided (duplex) printing on headed paper load the paper with pre-
printed side down and the top edge away from the MFP.
• Envelopes should be loaded face up with top edge to the left and short edge
into the MFP. Do not select duplex printing on envelopes.
• Load transparencies face up and top edge into the MFP.
5. Set the correct paper size for the multi purpose tray in the Printer menu.
a. Press the Down Arrow key repeatedly until Menu appears, then press Enter.
b. Naviate: Menu Function > Print Menu > Tray Configuration >
(i) For MB460 MFP: Manual Feeder Config > Paper Size.
(ii) For MB470 MFP/MB480 MFP: MP Tray Config > Paper Size.