Olivetti d-Color P26W - Manual (Page 56)

Menu functions> 56
S
YSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you
prefer to work.
I TEMS S ETTINGS E XPLANATION
POW SAVE TIME 5
15
30
60
240
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a
low level required to just keep the
printer operating and ready to
receive data. When a job is sent the
printer will require a warm-up time
of up to 1 minute before printing can
begin.
CLRABLE
WARNING ON
JOB When ON, non-critical warnings,
such as requests for a different
paper size, can be cleared by
pressing the
ON LINE button.
When set to JOB, they are cleared
when the print job resumes.
MANUAL
TIMEOUT OFF
30
60 Specifies how many seconds the
printer will wait for paper to be fed
before cancelling the job.
WAIT TIMEOUT 5~40~300 Specifies how many seconds the
printer will wait when received data
pauses before forcing a page eject.
In PostScript Emulation mode the
job will be cancelled if timeout
occurs.
LOW TONER CONTINUE
STOP Specifies whether the printer should
continue printing even after a low
toner condition is detected.
JAM RECOVERY ON
OFF
Specifies whether the printer should
perform jam recovery after a paper
jam has occurred. If ON, the printer
will attempt to print again any pages
lost due to a paper jam once the jam
has been cleared.
ERROR REPORT ON
OFF
If ON, the printer will print error
details when a PostScript Emulation
error occurs.