Roland CD-2e - Manual (Page 21)

21
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
Turning the Power On and Off
You can operate the CD-2e either from a household electrical outlet or using six AA batteries
(sold separately).
If you’re using the dedicated AC adaptor, batteries are not required.
1
Connect the power
* Place the dedicated AC adaptor so the side with the indicator (see illustration) faces upwards and
the side with textual information faces downwards. The indicator will light when you plug the
dedicated AC adaptor into a power outlet.
fig.ACadaptor-e.esp
2
On the CD-2e’s rear panel, move the [POWER] switch to the “ON”
position.
When the power is turned on, the screen will light.
fig.power-on.eps
1
On the CD-2e’s rear panel, move the [POWER] switch to the “OFF” position.
Using the Dedicated AC Adaptor
Turning the power off
To power
outlet
Dedicated AC Adaptor (included)
AC cord (included)
Bottom of the CD-2e
Cord hook
The CD-2e’s rear panel has a slot and cord hook for securing the cord
of the dedicated AC adaptor.
Use the cord hook to fasten the AC adaptor cord so that it won’t be
pulled out accidentally.
* Do not force the cord into the slot. Doing so may break it.
* When turning the CD-2e upside down, place stacks of newspapers or magazines to
support the four corners (or two sides) so that stress is not placed on the buttons or knobs,
possibly damaging them. Also, handle the CD-2e with care, and avoid dropping it.
* The shape of the power cord’s plug varies
depending on the country.
Indicator
Connect the plug of the dedicated AC adaptor to
the AC adaptor jack on the CD-2e’s rear panel.
Connect the included power cord to the dedicated
AC adaptor.
Plug the power cord all the way into the AC outlet.
CD-2e_e.book 21 ページ ２００７年１０月２４日 水曜日 午前１１時１６分