Roland CD-2e - Manual (Page 109)

109
Connecting External Speakers (continued)
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
You can choose the audio source that is output from the LINE OUT jack.
1
Press the [MENU] button to access the menu screen, and choose “LINE
OUT Select.”
fig.menu-format-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “LINE OUT
Select.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to choose the audio source that will be output from
the LINE OUT jack.
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Selecting the Audio Source that’s Sent from the LINE
OUT Jack
Value Explanation
Mix (factory setting) The audio of all sources is mixed and output.
MIC The audio from the EXT MIC jacks or the CD-2e’s internal mics is output.
LINE The audio from the LINE IN jacks is output.
SD/CD The audio from the SD memory card or CD is output.
CD-2e_e.book 109 ページ ２００７年１０月２４日 水曜日 午前１１時１６分