Telnet, Settings that can be used with postscript 3, Telnet settings that can be used with postscript 3 – Ricoh 1350 User Manual
Page 147

List of the Setting Items
139
5
telnet
The following telnet can be used with the machine:
access, appletalk, authfree, autonet, bonjour (rendezvous), btconfig, device-
name, dhcp, diprint, dns, domainname, help, hostname, ifconfig, info, ipp, ipv6,
lpr, netware, passwd, prnlog, route, set, show, slp, smb, snmp, sntp, spoolsw,
sprint, ssdp, ssh, status, syslog, upnp, web, wiconfig, wins
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings
Selectable Items
Collate:
Off, On
Dithering:
Auto, Photographic, Text, User Setting
Duplex:
Off, Open to Left, Open to Top
Fit to Print Size:
Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing:
Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
Input Tray:
AutoSelect Tray, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6,
Tray 7
Output Tray:
Printer Default, Finisher SR5000 Upper Tray, Finisher SR5000
Shift Tray, Finisher BK5000 Booklet Tray
Resolution
600 dpi, 1200 dpi
Size:
See General Settings Guide.
Staple:
Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Cen-
ter
Edge Smoothing
On, Off
Toner Saving
On, Off
Type:
See General Settings Guide.
Paper Selection:
Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch:
Off, 2 at Left, 2 at Right, 2 at Top, 4 at Left, 4 at Right, 4 at Top,
Multiple at Left, Multiple at Right, Multiple at Top
Z-fold:
Off, Bottom Fold, Right Fold, Left Fold