Ricoh 1350 - Manual (Page 101)

Printing from the Print Job Screen
93
3
Hold Print
Use this function to temporarily hold a file in the machine, and print it from the
computer or the machine's control panel later.
Important
❒ A Hold Print file cannot be stored if:
• the total number of Sample Print, Locked Print, Hold Print, and Stored
Print files in the machine is over 100. (The maximum number varies de-
pending on the volume of data in files.)
• the file contains over 2,000 pages.
• sent or stored files in the machine contain over 15,000 pages in total.
Note
❒ If a Hold Print file has not been stored properly, check the error log on the
control panel (see p.108 “Checking the Error Log”).
❒ Even after you turn off the machine, stored documents in the machine re-
main. However, the [Auto Delete Temporary Print Jobs] or [Auto Delete Stored Print
Jobs]
settings are applied first (see “Printer Features”, General Settings
Guide).
❒ If the application has a collate option, make sure it is not selected before send-
ing a print job. By default, Hold Print jobs are automatically collated by the
printer driver. If a collate option is selected from the application's Print dialog
box, more prints than intended may be produced.
Printing a Hold Print File
The following procedure describes how to print a Hold Print file with the PCL 6
/ 5e and the RPCS printer driver. For information about how to print a Hold
Print file with the PostScript 3 printer driver, see Postscript 3 Supplement in-
cluded as a PDF file in the supplied CD-ROM.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this function.
❒ If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this function.
A
Configure Hold Print in the printer driver’s properties.
For details about configuring the printer drivers, see the relevant Help files.
B
Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a file name. The file name you set will be displayed on the
machine's control panel.
C
Start printing from the application’s [Print] dialog box.
The Hold Print job is sent to the machine and stored.