Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe - Manual (Page 23)

23 Troubleshooting
If you still have problems, disconnect the phone. If other phones on the same line work proper-
ly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to
your local RadioShack store for assistance.
CARE
Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in nor-
mal temperature environments. Handle the phone carefully; do not drop it. Keep the phone
away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the phone’s internal components can cause a malfunction and
might invalidate its warranty and void your FCC authorization to operate it. If your phone is not
performing as it should, take it to your local RadioShack store for assistance. If the trouble is
affecting the telephone lines, the phone company can ask you to disconnect your phone until
you have resolved the problem.
The handset does not ring or receive a
page. Move the handset closer to the base.
Lift the base’s antenna to a vertical position.
Be sure the battery pack in the handset is connected and
charged.
Move the base away from other electrical devices.
You have an incoming call, but do not
receive any Caller ID information. Let the phone ring twice before you answer so the phone
has time to record the Caller ID information.
Check that the phone is correctly and securely connected.
Check with your phone company to verify that your Caller
ID service is active.
Problem Suggestion