Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe - Manual (Page 12)

12 Installation
4. Press TALK or place the handset on the
base to hang up.
SETTING THE RINGER
TONE/VOLUME
You can select one of four different ringer
tone/volume settings on the handset. At any
time, except during a call, repeatedly press
VOL/CID
8 8 8 8
or
9 9 9 9
to select the desired ringer
setting. Each time you press a button, the
phone rings at the selected setting and
H_d][h H_d][h H_d][h H_d][h
7777 >_]^ >_]^ >_]^ >_]^
,
H_d][h H_d][h H_d][h H_d][h 7777 Bem Bem Bem Bem
,
H_d][h H_d][h H_d][h H_d][h 8888 >_]^ >_]^ >_]^ >_]^
, or
H_d][h H_d][h H_d][h H_d][h 8888
Bem Bem Bem Bem
appears.
You can also turn off the ringer. At any time,
except during a call, hold down
VOL/CID
9 9 9 9
until the phone beeps and
H_d][hýE\\ H_d][hýE\\ H_d][hýE\\ H_d][hýE\\
appears.
When you place the handset faceup on the
base,
2H_d][hýE\\4 2H_d][hýE\\4 2H_d][hýE\\4 2H_d][hýE\\4
appears.
You can still make or receive a call even
when the ringer is turned off. When you have
an incoming call, any other phone connected
to the same line rings, and
?dYec_d]ý9Wbb ?dYec_d]ý9Wbb ?dYec_d]ý9Wbb ?dYec_d]ý9Wbb
ap-
pears.
To turn the ringer back on, simply press VOL/
CID
8 8 8 8
or
9 9 9 9
. The ringer is restored at Ringer
A High.
TURNING AUTO TALK
ON/OFF
Your phone is preset so you must press
TALK when you lift the handset from the base
to answer a call. With auto talk turned on,
you can answer a call by just lifting the hand-
set from the base. If the handset is away
from the base, you can answer by pressing
any key.
Follow these steps to turn auto talk on or off.
1. Lift the handset and press FUNC . A
menu appears with
7kje 7kje 7kje 7kje JWba JWba JWba JWba
selected.
2. Press SELECT/CH to change the auto
talk setting.
Ed Ed Ed Ed
or
E\\ E\\ E\\ E\\
appears.
3. Return the handset to the base or press
FUNC to store the new setting.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID
service, you can set the phone to show Call-
er ID information for an incoming call even
while you are using the phone.
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and press FUNC .
2. Press 2 or VOL/CID
9 9 9 9
to select
9?:9M 9?:9M 9?:9M 9?:9M
(Caller ID/Call Waiting).
3. Press SELECT/CH to change the Caller
ID/Call Waiting setting.
Ed Ed Ed Ed
,
Efj Efj Efj Efj
, or
E\\ E\\ E\\ E\\
appears.
With the Opt setting, you can use the
advanced Caller ID/Call Waiting options.
See “Call Waiting Options Service” on
Page 18.
4. Return the handset to the base to store
the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone’s Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store in the memory),
you can add it afterwards. See “Adding/De-
leting the Area Code” on Page 20.
Note: If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.