Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe - Manual (Page 19)

19 Caller ID Operation
tion voice mail, if available.
Je Je Je Je Le_Y[ Le_Y[ Le_Y[ Le_Y[ CW_b CW_b CW_b CW_b
appears on your phone.
Note: Voice Mail is a service available
from some telephone companies. A call
for a subscriber can be kept at the tele-
phone company and retrieved later on
by calling the special number and enter-
ing the caller’s phone number and code
number. Check with your telephone
company to determine if this service is
available.
Answer/Drop 1 — Disconnects the first
call, and connects automatically to the
new caller.
7dim[h%:hef 7dim[h%:hef 7dim[h%:hef 7dim[h%:hef ''''ij ij ij ij
appears.
Conference — Allows you to speak with
your first and second callers to have a 3-
way conference call.
9ed\[h[dY[Z 9ed\[h[dY[Z 9ed\[h[dY[Z 9ed\[h[dY[Z
appears.
Drop First/Drop Last — only use with a
conference call (see “Using Confer-
ence”).
Using Ask to Hold
When you select
7ia 7ia 7ia 7ia je je je je >ebZ >ebZ >ebZ >ebZ
, you can then
use several of the other options as well.
If you decide you cannot end your first call,
and you do not want to continue to leave the
second call on hold, press
FUNC .
To notify the second caller that you can-
not take the call, scroll down to
J[bbý8kio J[bbý8kio J[bbý8kio J[bbý8kio
or press 2 .
To send the second caller to voice mail
(if you have voice mail), scroll down to
JWa[ JWa[ JWa[ JWa[ C[iiW][ C[iiW][ C[iiW][ C[iiW][
or press 3 .
Press SELECT/CH .
If you decide to take the second call, and end
the first, scroll down to
7dim[h%:hef 7dim[h%:hef 7dim[h%:hef 7dim[h%:hef ''''ij ij ij ij
or
press 4 . Press SELECT/CH .
If you decide to include the second caller in
your conversation with the first caller, scroll
down to
9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[
or press 5 . Press SELECT/
CH .
Using Conference
You can either begin a conference call as
soon as you receive a second call, or after
the second caller has been on hold for a
while (see “Using Ask to Hold”). Once you
have established a conference call, you can
end it at any time by dropping one of the
calls.
Drop First — hang up on the first caller and
continue with the second.
Drop Last — hang up on the second caller
and continue with the first.
Follow these steps to drop one of the calls.
1. To end a conference call, press FUNC .
2. Scroll down to
:hef :hef :hef :hef <_hij <_hij <_hij <_hij
(or press 6 ) or
:hef :hef :hef :hef BWij BWij BWij BWij
(or press 7 ) to drop the desired
call.
3. Press SELECT/CH .
9Wbb 9Wbb 9Wbb 9Wbb :heff[Z :heff[Z :heff[Z :heff[Z
appears
on your phone.
REVIEWING CALLER
ID RECORDS
To review the Caller ID records, lift the hand-
set and press
CID . The number of new Caller
ID records, if any, and the total number of
records appear.
Note: If the handset is faceup on the base, it
shows the number of Caller ID records, so
you can see if you have new records to re-
view.
Repeatedly press VOL / CID
9 9 9 9
to scroll
through the Caller ID records from the new-
est to the oldest, or
VOL / CID
8 8 8 8
to scroll back