8 primary lens adjustments, Focus and zoom, Vertical lens shift – Runco VX-2000d User Manual

Page 45: Primary lens adjustments, 15. vertical and horizontal lens shift adjustments, Pre l iminar y

Text mode
Original mode

Installation

Runco VX-2000d Owner’s Operating Manual

PRE

IMINAR

3.8
Primary Lens
Adjustments

Focus and Zoom

To focus the projected image, gently rotate the lens by
hand.

To enlarge the picture (zoom in), move the zoom tab
toward the Runco logo on the front of the projector. To
make the picture smaller (zoom out), move the tab in the
other direction.

Vertical Lens Shift

To change the projected image position, use a 9/64” hex driver to shift the lens in the
desired direction; see Figure 3-15. The vertical lens shift control is at the top of the
projector. (The tool will automatically center on top of the adjustment nut when inserted
into the access hole.)

Figure 3-15. Vertical and Horizontal Lens Shift Adjustments

Zoom
in

Focus

Zoom
out

9/64” Hex Wrench